英國Cussons發動機層流流量計P7200\P7217
價 格:詢價
產 地:英國更新時間:2020-10-29 10:40
品 牌:Cussons型 號:P7200\P7217
狀 態:正常點擊量:2681
400-006-7520
聯系我時,請說明是在上海非利加實業有限公司上看到的,謝謝!
聯 系 人:
上海非利加實業有限公司
電 話:
400-006-7520
傳 真:
400-006-7520
配送方式:
上海自提或三方快遞
聯系我時請說在上海非利加實業有限公司上看到的,謝謝!
¨ Accurate Flow Measurement
¨ Ranges available 25 to 650 litres per second
¨ May be used with Pulsating Flows
¨ Unaffected by Elbows or Bends in Ducts
¨ True linear Characteristics
¨ “Square Law” Errors Eliminated by Tuning
¨ Large Turn Down Ratio
¨ Element Removable for Cleaning
¨ Improved Pneumatic Damping at Pressure Connections
產品參數
最大空氣流量(升/秒) 傳感器尺寸 總尺寸
型號 發動機額定流量 穩定流量 直徑(mm) 通道尺寸(mm) 長度 直徑
P7200 25 200 95 0.46 433 153
P7201 50 134 95 0.61 433 153
P7204 50 400 120 0.46 470 180
P7205 100 237 120 0.61 470 180
P7208 100 800 160 0.46 500 225
P7209 200 457 160 0.61 500 225
P7212 200 1600 215 0.46 615 285
P7213 350 887 215 0.61 615 285
P7216 350 2800 305 0.46 735 370
P7217 650 1733 305 0.61 735 370
產品介紹
Cussons new range of Laminar Flow Meters (LFM) have been developed from the Ricardo Viscous Flow Air Meters
(VFAM) originally introduced by J. F. Alcock for measuring pulsating air flows in internal combustion engine air intakes.
This new range of air flow meters retains all the attributes of the previous range, and also introduces new features, whilst extending the number of meter sizes which are available.
· Five sizes of housing for nominal element diameters at 95 mm, 120 mm, 160 mm. 215 mm and 305 mm.
· Elements of 0·61 mm passage size for multi-cylinder engines.
· Elements of 0·46 mm passage size for single cylinder and twin cylinder engines.
· The Elements can now be removed from the meter housings for ultrasonic cleaning.
· Housings incorporate provisions for mounting the pressure transducers (from Cussons P7028 Mass Flow Computer) on the housing in a sealed enclosure.
· Improved pneumatic damping is provided at the pressure connection points.
Laminar Flow Meters eliminate the measurement errors which occur with pulsating flows with kinetic meters of the orifice or venturi type. These errors, which are due to both root mean square effects and to pulsating flow in the measurement ports, are eliminated in LFMs as the resistance to flow of the element is directly proportional to velocity, and pressure tapping connection errors are eliminated by the special design of the connections, any square law entry and exit losses to the element are tuned out during calibration.