PR-26E-3-100-A-M6-0250-M12-1_PR-26E-3-100-A-M6-035
價 格:詢價
產 地:美國更新時間:2020-10-30 16:55
品 牌:歐米茄型 號:PR-26E-3
狀 態:正常點擊量:2631
400-006-7520
聯系我時,請說明是在上海非利加實業有限公司上看到的,謝謝!
聯 系 人:
上海非利加實業有限公司
電 話:
400-006-7520
傳 真:
400-006-7520
配送方式:
上海自提或三方快遞
聯系我時請說在上海非利加實業有限公司上看到的,謝謝!
PR-26E-3-100-A-M6-0250-M12-1_PR-26E-3-100-A-M6-0350-M12-1溫度傳感器OMEGA
CPVC or PVDF structure
Its design is suitable for installation in tank
Easy to install in the box
Submerged mounting electrode
產品參數
PR-26E-3-100-A-M6-0250-M12-1_PR-26E-3-100-A-M6-0350-M12-1溫度傳感器OMEGA
OMEGA PHE/ORE-6510 submerged mounting electrode is designed for use in cylinder block, water tank and flowing liquid. Its induction plane is surrounded by permeable polyethylene reference liquid connection, which can reduce fouling retention. The installation and removal of the electrodes are accomplished by a simple quick detachment device with a rotating coil. The head of the cable assembly has MNPT threads, which can be connected to the coupling parts and the supporting pipeline. The pipeline can be simply mechanically installed to protect the cable from contact with the liquid to be measured. As a result, the components are light in weight and easy to handle when they need to be maintained. Automatic temperature compensation (ATC) can be provided as part of the installation component.
Planar electrodes are ideal for applications where suspended solids are relatively large or flocculation requires low speed.
If the electrode is only used at low speed and has a covering layer on the surface, the electrode can be installed at 45 angle of the fluid, thus achieving a stronger scrubbing effect on the measured surface.
產品介紹
PR-26E-3-100-A-M6-0250-M12-1_PR-26E-3-100-A-M6-0350-M12-1溫度傳感器OMEGA
全焊接316L不銹鋼外殼
工作溫度范圍: 感應端-50~500°C (-58~932°F), 連接器-50~250°C (-58~482°F)
可不帶安裝螺紋,亦可帶以下安裝螺紋:M8x1、M10x1、G? BSPP和 G? BSPP
Pt100或Pt1000 4線鉑RTD元件,符合(IEC60751) Class A -50~300°C, Class B 300~500°C
便于連接的***體式4針M12連接器
標配6 mm直徑
***小長度65 mm
探頭可彎曲 (從探頭尖端開始65 mm以后), 彎曲時建議的***小彎曲半徑為探頭直徑兩倍
已按照標準MIL-STD-202G, 測試方法 204D, 測試環境 A (10 g加速度, 10 to 500 Hz) 進行了振動測試 (覆蓋150mm的長度或更短規格)