Dwyer德威爾 PFG2-02 PFG2-03 PFG2-06 差壓表/差壓指示器
價 格:詢價
產 地:美國更新時間:2020-11-02 17:12
品 牌:德威爾型 號:PFG2-02 PFG2-03 PFG2-06
狀 態:正常點擊量:2325
上海非利加實業有限公司
聯 系 人: 上海非利加實業有限公司
電 話: 400-006-7520
傳 真: 400-006-7520
配送方式: 上海自提或三方快遞
聯系我時請說在上海非利加實業有限公司上看到的,謝謝!
Dwyer德威爾 PFG2-02 PFG2-03 PFG2-06 差壓表/差壓指示器
PFG2是專為確定過濾器兩端的差壓的狀態。壓差指示確定壓降,過濾器兩側用1/8"螺紋連接,指示分為三個區:清潔(綠色),有臟(黃色),很臟(紅色)。PFG2是完全適合的濾波器的應用,管路通暢,閥的壓降,和許多其他的壓差應用在***個簡單的指標是必要的。工藝流程的方向盤上顯示,用箭頭指向低壓端口。為了改變高和低的壓力連接,簡單的從安裝底座拆卸指示器和旋轉180°。
The SERIES PFG2 Process Filter Gage is designed for determining the state of an inline filter. The differential pressure indicator determines the pressure drop on either side of a filter through its 1/8" female NPT pressure connections, and relates the value to one of three zones: clean (green), change (yellow), or dirty (red). The Series PFG2 is perfectly suited for filter applications, line loss, valve drop, and many other differential pressure applications where a simple indicator is needed. The direction of process flow is indicated on the dial, with the arrow pointing to the low pressure port. The PFG2 can be connected in-line through the side process connections, but can also be directly mounted through the outlet/inlet.
產品參數
Dwyer德威爾 PFG2-02 PFG2-03 PFG2-06 差壓表/差壓指示器
Service: Liquids/gases compatible with SS, GFN, and fluoropolymer.
Wetted Materials: Aluminum, SS, glass filled nylon, and fluoropolymer.
Accuracy: ±5% F.S.
Temperature Limit: 200°F (93°C).
Pressure Limit: 300 psig (20.7 bar).
Materials: Body: Glass filled nylon; Mounting Block: Aluminum; Lens: Polyester; Elastomers: Fluorocarbon.
Process Connection: 1/8" female NPT.
Mounting Orientation: Any orientation with 10-32 threaded holes 3/4" apart.
Weight: 9.6 oz (272.2 g).
產品介紹
Service: Liquids/gases compatible with SS, GFN, and fluoropolymer.
Wetted Materials: Aluminum, SS, glass filled nylon, and fluoropolymer.
Accuracy: ±5% F.S.
Temperature Limit: 200°F (93°C).
Pressure Limit: 300 psig (20.7 bar).
Materials: Body: Glass filled nylon; Mounting Block: Aluminum; Lens: Polyester; Elastomers: Fluorocarbon.
Process Connection: 1/8" female NPT.
Mounting Orientation: Any orientation with 10-32 threaded holes 3/4" apart.
Weight: 9.6 oz (272.2 g).